- 360 Grad Bild (HTML Code):
<a class="Magic360" data-options="columns: 73; rows: 1;"><img src="images/stories/produkte/ACA/360-webp/01.webp" /></a>
- Untersuchung von:
- Eigenschaft:
paper
- Eigenschaft:
board
- Eigenschaft:
plastic film
- Vorteile:
- Vorteil:
non- destructive measurement without combustion
- Vorteil:
quantitative determination of individual fillers
- Vorteil:
availability of the results within seconds (approx. 60 sec.)
- Vorteil:
high accuracy of measurements
- Vorteil:
easy handling (self-explanatory operation)
- Vorteil:
results independent of operator
- Vorteil:
easy portable (in a trolley)
- Vorteil:
savings in time and energy (compared to combustion)
- Vorteil:
optimal process control due to instant availability of measuring results
- Vorteil:
efficient calibration of online ash sensors (especially in case of frequent grade changes)
- Produktbeschreibung:
With the combustion method according to ISO 2144, DIN 54370, TAPPI T 413 and 211, which is traditionally applied in the paper industry, the total content and a few selected individual fillers can only be determined through an extremely time- and energy-consuming and in routine operation relatively inaccurate combustion of the samples at different temperatures (+/- 5%, operator dependent!). The combustion method is also disadvantageous due to its destructive measuring procedure.
By the use of the emtec ACA Ash Content Analyzer with its new and innovative measuring principle the total ash content (fillers and pigments), but also the percentage content of the typical fillers in the paper industry can be determined within seconds without combustion of the samples, i.e., non-destructive.
The quick measuring procedure leads to an almost instant availability of measuring results and therefore allows for an indeed immediate reaction to changes in the process:
- Immense material savings can be achieved through the reduction of process fluctuations
- The consumption of fillers can be reduced, as the immediate availability of results and the high accuracy of the ACA enables the narrowing down of the specifications for the filler content in the finished product, resulting in a much more efficiently organized process optimization (e.g. retention optimization)
- Costs for energy of the combustion process can be saved. Thus, the use of the new measuring device guarantees a fast "return on investment" by a substantial reduction of costs in material, time, and energy
- Anwender:
Chemical suppliers, Paper producers , Paper converters, Board producers , Corrugated board producers , Pulp producers, Universities & Institutes, Producers of pigments
- Anwendungsgebiete:
Process optimization, Product optimization, R&D, Incoming control, Quality assurance, Complaint management, Troubleshooting
- Ergebnisse:
- Wert:
% value
, Beschreibung:
Total filler content
- Wert:
Individual fillers (%)
, Beschreibung:
Calcium carbonate, Titan dioxide, Kaolin/Talcum, Barium sulfate, Iron oxide
- technische Daten:
- Titel:
device dimensions
(H x W x D), Wert:
approx. 43.1 x 32.1 x 26.1 cm (folded), Beschreibung:
approx. 43.1 x 32.1 x 38.3 cm
(unfolded)
- Titel:
weight, Wert:
approx. 15 kg
- Titel:
measuring principle , Wert:
X-ray fluorescence
analysis
- Titel:
radiation source, Wert:
X-ray tube (gold, 10 kV,
5 μA)
- Titel:
accuracy of
measurement, Wert:
approx. ≤ ±1-2 % (abs.)
- Titel:
measurement time, Wert:
approx. 60 sec
- Titel:
grammage max., Wert:
1000 g/m2
- Titel:
power supply, Wert:
100 - 240 VAC (50/60
Hz)
- Downloads:
- Beschriftung :
Leaflet (English), Link:
images/stories/infomaterial/02_ACA/01_Leaflet/emtec_ACA_leaflet_en.pdf
- Beschriftung :
Leaflet (French), Link:
images/stories/infomaterial/02_ACA/01_Leaflet/emtec_ACA_leaflet_fr.pdf
- Beschriftung :
Leaflet (Spanish), Link:
images/stories/infomaterial/02_ACA/01_Leaflet/emtec_ACA_leaflet_es.pdf
- Beschriftung :
Leaflet (Italian), Link:
images/stories/infomaterial/02_ACA/01_Leaflet/emtec_ACA_leaflet_it.pdf
- Beschriftung :
Leaflet (Turkish), Link:
images/stories/infomaterial/02_ACA/01_Leaflet/emtec_ACA_leaflet_tr.pdf
- Beschriftung :
Leaflet (Swedish), Link:
images/stories/infomaterial/02_ACA/01_Leaflet/emtec_ACA_leaflet_se.pdf
- Beschriftung :
Leaflet (Japanese), Link:
images/stories/infomaterial/02_ACA/01_Leaflet/emtec_ACA_leaflet_jp.pdf
- Beschriftung :
Leaflet (Chinese), Link:
images/stories/infomaterial/02_ACA/01_Leaflet/emtec_ACA_leaflet_zh.pdf
- Beschriftung :
Leaflet (Russia), Link:
images/stories/infomaterial/02_ACA/01_Leaflet/emtec_ACA_leaflet_ru.pdf
- Beschriftung :
Leaflet (Polish), Link:
images/stories/infomaterial/02_ACA/01_Leaflet/emtec_ACA_leaflet_pl.pdf
- Beschriftung :
Booklet (English), Link:
images/stories/infomaterial/02_ACA/02_Booklet/emtec_ACA_Ash_Content_Analyzer_booklet_en.pdf
- Applikationsbeispiele inaktiv:
Nein
- Applikationsbeispiele:
Evaluation of decor paper with the ACA: what fillers and what amount of each is in the paper
- Videos:
- Vorschaubild:
, Videodatei:
images/stories/infomaterial/02_ACA/05_Produktvideos/10_Internet/aca-1080.mp4
- Zubehör inaktiv:
Ja
- verwandte Produkte:
CAS touch! - Charge Analyzing System, EST 12 - Surface and Sizing Tester, FPA touch! - Fiber Potential Analyzer, FPO - Fiber Potential Analyzer online, PDA.C 02 MST - Module Standard, Sample Punch
With a completely new and innovative measuring principle, the emtec ACA Ash Content Analyzer measures the total filler content and the individual fillers, which are typically used in the paper industry, of paper and board. Compared to the traditional combustion method, the ACA measures non-destructive and provides the results within seconds.
German-based testing device manufacturer emtec Electronic will exhibit an innovative product portfolio designed to improve processes and product quality, reduce waste and save energy at the Paper & Biorefinery trade conference from May 24-25 in Graz, Austria.
Organized by the Academic Paper Engineering Association of the Graz University of Technology (APV Graz), the annual trade fair brings together major names and newcomers from the pulp, paper and board industries for two days of idea exchange and networking. This year’s focus is on sustainable energy solutions, and the lineup includes...
German device manufacturer emtec Electronic GmbH presents an inventive product line of specialized testing and measuring equipment at the renowned TAPPICon convention for pulp, paper and cardboard professionals from April 22-26, 2023 in Atlanta, Georgia.
The demand for paper products remains significant even in the digital age, with the global pulp and paper industry expected to reach a value of roughly 373 billion U.S. dollars by 2029, according to market analyst Statista. Yet consumer preferences are also changing, with a greater focus on sustainable and socially responsible products. At...
emtec Electronic mit dem Workshop „Wellpappe” in Leipzig
emtec Electronic GmbH wird am 16. und 17. Januar 2019 zum dritten Mal den Workshop „Wellpappe“ in Leipzig halten. Zusammen mit zwei weiteren Experten sollen Möglichkeiten zur Optimierung der Wellpappenproduktion aufgezeigt werden, wobei der Schwerpunkt auf der Vorhersage von Verklebbarkeit und Bedruckbarkeit von Papier liegt.
Papier und Karton werden üblicherweise für die Weiterverarbeitung hergestellt. Die Wechselwirkung von Papier und Karton mit den im Prozess eingesetzten Flüssigkeiten, wie zum Beispiel Klebstoff oder Druckfarbe,...
emtec Electronic mit dem Workshop „Wellpappe” in Leipzig
emtec Electronic GmbH wird am 16. und 17. Januar 2019 zum dritten Mal den Workshop „Wellpappe“ in Leipzig halten. Zusammen mit zwei weiteren Experten sollen Möglichkeiten zur Optimierung der Wellpappenproduktion aufgezeigt werden, wobei der Schwerpunkt auf der Vorhersage von Verklebbarkeit und Bedruckbarkeit von Papier liegt.
Papier und Karton werden üblicherweise für die Weiterverarbeitung hergestellt. Die Wechselwirkung von Papier und Karton mit den im Prozess eingesetzten Flüssigkeiten, wie zum Beispiel Klebstoff oder Druckfarbe,...
The largest convention for the pulp and paper industry in Central and South America, the International Congress and ExpoAcotepac 2023, will take place in Cali, Colombia from February 8-10, 2023. IDM Test will be onsite to present innovative testing devices for quality control and product optimization at the event, including the emtec Electronic product line.
Accurate data regarding the cationic demand and zeta potential of fibers in the wet end of papermaking leads to a smoother running process and higher product quality. With this end in mind, emtec Electronic GmbH developed the partner...
Non-destructive Qualitative and Quantitative Measurement of the Filler Content of Paper and Board
Emtec participates at the New Technology Showcase and Poster Session at the PaperCon 2018
Emtec Electronic presents its measuring innovations and proven methods to the paper and packaging professionals at the PaperCon 2018 from April 15 - 18, 2018 in Charlotte, NC, USA. The developer and manufacturer of measuring equipment will participate at the PaperCon with Technidyne, its US sales partner, and will be present at the Technidyne booth no. 812. Additionally, this year Mr. Alexander Gruener from...
In September, emtec Electronic GmbH appears at the PTS Paper and Board Symposium in the congress hall in Munich, Germany. On September 17th and 18th, 2014 it is possible to have a look at the PDA.C 02 – Penetration Dynamics Analyzer, which characterizes the properties of paper and board surfaces for converting (coating, printing, glueing).
But also the innovative ACA – Ash Content Analyzer will be showcased. Within seconds it delivers, beside the total ash content, the percentage of the single fillers and minerals in paper and board. Therefore, the ACA serves as a replacement of the traditional,...
Emtec Electronic GmbH will attend the South American „Expo ACOTEPAC 2015“ in Cali, Colombia. From February 25th until 27th, the company will be present at the exhibition together with Elof Hansson International AB.
The technical equipment, which will be presented in Cali this time are the emtec EST12 Surface & Sizing Tester for characterizing the process relevant surface parameters of paper and board. Its application leads to the optimization of the production and converting processes to gain the best possible quality at the lowest possible costs.
Additionally, emtec Electronic will...
From June 04th until 05th, emtec Electronic GmbH will participate at the "Future. Forum Paper" – the Austrian Paper Conference with trade show for pulp and paper industry in Graz.
During the two days emtec will present different testing instruments by which the process from the production of the pulp to the conversion to the finished product can be controlled and guided in the right direction to get an efficient process and the best possible quality with the lowest possible costs.
In the wet end it is extremely important to have detailed information about the charges of particles in the...
The Italian tissue and paper industry will meet again from October 10th to 12th in Lucca and the German company emtec Electronic GmbH will attend together with the Italian representatives Qi Srl and Metreo Srl. An interesting selection of their innovative testing instruments for the pulp, tissue and paper industry are shown on the upper floor, booth no. 5B.
Displayed at the booth will be the state-of-the-art CAS touch! to measure the particle charge and the FPA touch! to measure the surface charge of fibers (zeta potential). Both devices help to get information about the efficiency of the chemicals,...
emtec Electronic GmbH will participate in the 8th edition of "PulPaper 2014" in Helsinki, Finland – an international exhibition for suppliers to the pulp, paper, board and converting industries. From June 03rd until 05th, emtec will be present at the exhibition booth no. 6g59.
During the PulPaper exhibition, emtec will show a variety of testing instruments by which the complete production process can be controlled and guided in the right direction to get an efficient process and the best possible quality with thelowest possible costs.
In the wet end it is extremely important to have detailed...
emtec Electronic GmbH will attend the "Zellcheming Expo 2014" in Frankfurt/Main, Germany – the 109th Annual Meeting and Exhibition. From June 24th until 26th, emtec will be present at the exhibition booth no. B73.
During the Zellcheming Expo, emtec will show a variety of testing instruments by which the complete production process can be controlled and guided in the right direction, to get an efficient process and the best possible quality with thelowest possible costs.
In the wet end it is extremely important to have detailed information about the charges of particles in the pulp suspension,...
As every year, emtec Electronic will attend the ABTCP in Sao Paulo, Brazil. The exhibition takes place from October 23rd to 25th. The German producer of innovative lab and online testing equipment can be found at booth no. 137/138 together with its Brazilian representative Elof Hansson.
Emtec will present the state-of-the-art charge measuring systems CAS touch! and FPA touch! Both devices are used to optimize the wet-end process, by measuring the interaction between particles or fibers with additives and process chemicals in the pulp suspension. The use of both instruments in the production...
Leipzig-based testing equipment manufacturer emtec Electronic will present progressive solutions for reducing broke, automating processes, and optimizing product quality at the Zellcheming Expo from June 20-22 in Wiesbaden, Germany.
Accurate testing is key to ensuring an efficient papermaking process and a high product quality. From knowledge of the pulp, to the mineral filler content, surface porosity, hydrophobia and haptics, having reliable data on hand enables manufacturers to achieve their production goals and a quick Return-On-Investment. In addition, easy digitization of the results...
From June 05th to 06th, the Paper & Biorefinery Conference 2019 takes place in Graz, Austria and people from the pulp, paper and biorefinery sector come together. The German developer and producer of innovative testing equipment, emtec Electronic GmbH, will showcase a variety of its instruments. From the wet end to the finished product, the application of the equipment enables an efficient process, to get the best possible quality with the lowest possible costs.
The smallest, lightest and most-modern charge measuring systems for the wet-end in paper and board production are the CAS touch!...
Also this year, emtec Electronic GmbH will have a booth at the International Munich Paper Symposium from March 27th to 29th. The company will present a variety of testing instruments by which the complete production process can be controlled and guided in the right direction. From the wet end to the finished product, the application of the equipment enables an efficient process, to get the best possible quality with the lowest possible costs.
The ACA Ash Content Analyzer enables the determination of the mineral filler content without combustion, that means without destruction of the samples,...
The pulp, paper and supplier industry will meet also this year at the Zellcheming Expo 2019 in Frankfurt/Main, Germany. From June 25th to 27th the company emtec Electronic will present their innovative measuring devices in hall 4.1 at the booth no. G18, by which the complete production process can be controlled and guided in the right direction.
At the beginning of this year, emtec Electronic celebrated a great success: the 300th TSA Tissue Softness Analyzer has been sold. The device is now used in 48 countries, in each part of the world. Especially for tissue products, the TSA gives reliable...
The German manufacturer of specialized testing and measuring equipment, emtec Electronic GmbH will showcase its innovative product lineup to improve process control, minimize waste, and ensure top product quality in Graz, Austria, from May 15-16.
The Paper & Biorefinery conference, a key event in the paper and pulp industry, addresses vital topics for the sector's future. This year, environmental protection and sustainability take center stage. Emtec will participate in the conference as an exhibitor, supporting these initiatives with devices that optimize processes, reduce waste and machine...
On Thursday, 08 January 2015, will be an emtec day in Poland, Lodz. During the Workshop at the Politechnika university different topics will be presented and discussed by several experts. Especially the CAS - Charge Analyzing System, the FPA - Fiber Potential Analyzer and also the FPO - Fiber Zeta Potential Analyzer Online will be presented regarding the process optimization and control in the wet end area of paper production. But also the PDA - Penetration Dynamics Analyzer and the TSA - Tissue Softness Analyzer for base and finished products will be shown. Everybody, who has interest in the...
- 360 Grad Bild (HTML Code):
<a class="Magic360" data-options="columns: 73; rows: 1;"><img src="images/stories/produkte/EST/360-webp/01.webp" /></a>
- Untersuchung von:
- Eigenschaft:
paper
- Eigenschaft:
board
- Vorteile:
- Vorteil:
measurement of the converting-relevant parameters surface sizing/surface hydrophobia and surface porosity
- Vorteil:
measured parameters help to optimize the converting process and the product quality, for example by adapting the converting process to the quality of the incoming paper or board
- Vorteil:
reliable and accurate test results, which help to solve issues in the converting process and with the product quality, where standard test devices are no help
- Vorteil:
Stand-alone device (connection to a PC and use with emtec PC software possible)
- Vorteil:
small and easy to transport, especially good for chemical suppliers
- Produktbeschreibung:
To make sure that the necessary product quality can be reached, specifications are agreed between paper maker and converter. These specifications are bases on standard test devices, such as Cobb or Gurley. But often it happens that although the quality of the base paper or board is within the agreed specifications, issues with the gluability, printability or coating-ability occur during the converting.
Since gluability, printability and coating-ability mainly depend on surface sizing and surface porosity, information about these two parameters are very important. But the standard test devices are not able to measure them. In comparison to this, the emtec EST is able to measure these two very important surface parameters within the time that is relevant for the converting process and by this helps to ensure a well-running converting process and the right product quality.
- Anwender:
Chemical suppliers, Paper producers , Paper converters, Board producers , Board converters, Corrugated board producers , Universities & Institutes
- Anwendungsgebiete:
Process optimization, Product optimization, Benchmarking, R&D, Incoming control, Quality assurance, Complaint management, Troubleshooting
- Ergebnisse:
- Wert:
MAX value
, Beschreibung:
surface sizing/hydrophobia
- Wert:
t95 value Max
, Beschreibung:
surface porosity
- technische Daten:
- Titel:
device dimensions, Wert:
25 x 14 x 25 cm (H x
W x D)
- Titel:
weight, Wert:
approx. 4 kg / 8.8 lbs
- Titel:
measuring
frequencies, Wert:
1 MHz, 2 MHz selectable
- Titel:
supply voltage, Wert:
100-240 VAC, 50/60 Hz
- Titel:
sample dimension, Wert:
75 x 50 mm
- Downloads:
- Beschriftung :
Leaflet (English), Link:
images/stories/infomaterial/05_EST/01_Leaflet/emtec_EST12_leaflet_en.pdf
- Beschriftung :
Leaflet (French), Link:
images/stories/infomaterial/05_EST/01_Leaflet/emtec_EST12_leaflet_fr.pdf
- Beschriftung :
Leaflet (Spanish), Link:
images/stories/infomaterial/05_EST/01_Leaflet/emtec_EST12_leaflet_es.pdf
- Beschriftung :
Leaflet (Italian), Link:
images/stories/infomaterial/05_EST/01_Leaflet/emtec_EST12_leaflet_it.pdf
- Beschriftung :
Leaflet (Turkish), Link:
images/stories/infomaterial/05_EST/01_Leaflet/emtec_EST12_leaflet_tr.pdf
- Beschriftung :
Leaflet (Swedish), Link:
images/stories/infomaterial/05_EST/01_Leaflet/emtec_EST12_leaflet_se.pdf
- Beschriftung :
Leaflet (Japenese), Link:
images/stories/infomaterial/05_EST/01_Leaflet/emtec_EST12_leaflet_jp.pdf
- Beschriftung :
Leaflet (Chinese), Link:
images/stories/infomaterial/05_EST/01_Leaflet/emtec_EST12_leaflet_zh.pdf
- Beschriftung :
Leaflet (Russia), Link:
images/stories/infomaterial/05_EST/01_Leaflet/emtec_EST12_leaflet_ru.pdf
- Beschriftung :
Leaflet (Polish), Link:
images/stories/infomaterial/05_EST/01_Leaflet/emtec_EST12_leaflet_pl.pdf
- Beschriftung :
Booklet (English), Link:
images/stories/infomaterial/05_EST/02_Booklet/01_EN/emtec_EST_Surface_and_Sizing_Tester_booklet_en.pdf
- Applikationsbeispiele inaktiv:
Nein
- Applikationsbeispiele:
Evaluation of the surface hydrophobia (Cobb60 vs. emtec EST)
- Zubehör inaktiv:
Ja
- verwandte Produkte:
PDA.C 02 MST - Module Standard
The emtec EST Surface & Sizing Tester helps to predict the gluability, printability and coating-ability of paper and board by measuring the converting-relevant parameters surface sizing (surface hydrophobia) and surface pore structure.
The pulp and paper industry will meet at the international exhibition and conference Paper Vietnam 2019 in Ho Chi Minh City from June 26th to 28th. Emtec Electronic, the German developer and producer of innovative testing instruments, will attend for the first time. Together with the Southeast Asian representative CLC Certified Lab Consultant, the company showcases a variety of its innovations at booth no. P65.
For the wet-end in paper and board production, the smallest, lightest and most-modern charge measuring systems are the CAS touch! and the FPA touch! The use of both instruments in the...
emtec Electronic at the IMPS 2015 in Munich
This year the IMPS – International Munich Paper Symposium will take place the 24th time and emtec Electronic GmbH will attend the event with a booth in Munich, Germany. From March 11th until 13th, emtec will present different special technical equipment – interesting for all players within the paper, board and tissue industry.
With the application of the special testing equipment it is possible to control and guide the complete process of paper, board or tissue production from the pulp to the finished product into the right direction, in order to...
Emtec Electronic attends the Corrugated Week in Indianapolis, USA
For the first time, emtec Electronic GmbH will attend the Corrugated Week in Indianapolis, USA from September 24th to 27th 2018, together with its US representative Technidyne. At exhibition booth no. 848 the company will present innovative testing instruments for the corrugated board industry.
The special EST12 Surface & Sizing Tester determines those surface parameters of paper and board, which are relevant for the converting process, in particular the surface sizing / hydrophobicity and surface porosity. With its help,...
Emtec test equipment enables a very exact evaluation of the relevant paper and board properties
Elof Hansson and emtec Electronic at ACOTEPAC 2020 in Cali, Colombia
From February 12th to 14th emtec presents its innovative measuring instruments for the pulp, paper and board industry at the ACOTEPAC conference (booth no. 56). The use of these devices enables a more efficient and reliable process and quality control from the wet end to the finished product and helps to achieve the best possible quality at the lowest possible costs.
At the ACOTEPAC interested visitors can take a look at the Charge...
emtec Electronic with a Workshop at the PaperWeek Canada 2015
emtec Electronic GmbH will attend the Canadian „PaperWeek / PAPTAC 2015“ in Montréal. From February 02nd until 05th, emtec Electronic will be present at the exhibition at booth no. 03 together with Technidyne Corporation Canada. Beside the participation at the exhibition, emtec Electronic will give several presentations and demonstrations in a workshop.
On Monday, the 02nd February, Mr. Stefan Rübesam will talk about the EST12 Surface & Sizing Tester, which gives reliable and objective information about the surface sizing...
emtec Electronic at RosUpack 2015 in Moscow
The company emtec Electronic GmbH will attend the Russian „RosUpack 2015“ in Moscow. From June 16th until 19th, the company will be present at the exhibition at booth no. B231 in hall 1.2 together with Sigma Micron – their representative in Russia.
The technical equipment, which will be presented in Moscow, are the emtec EST12 Surface & Sizing Tester for characterizing the process-relevant surface parameters of paper and board to predict the behavior during coating, printing and glueing. Its application leads to the optimization of the production...
emtec Electronic at the Maqpaper 2014 in Igualada, Spain
emtec Electronic GmbH will participate the "Maqpaper 2014" in Igualada, Spain, near Barcelona, where suppliers and producers of the pulp, paper and cardboard industry meet and greet. From April 02nd until 03rd, we will attend the exhibition together with IDM test – our representative for Spain and Portugal.
During the Maqpaper exhibition, emtec will present different testing instruments by which the process from the production of the pulp to the conversion to the finished product can be controlled and guided in the right direction...
emtec Electronic at the KRONA Institute in St. Petersburg
emtec Electronic GmbH will participate at the IV Annual International State-of-the-Art Conference 2015 at the KRONA Institute in St. Petersburg in Russia with the topic "Modern Systems for Paper and Board Quality Control". On 18th February, Ms. Elena Beznosova will speak about "Predicting the surface behavior of paper and board during glueing and printing processes" and present some different Paper Testing Technology to optimize the production process of paper and board from the pulp to the finished product with the goal getting an efficient...
- 360 Grad Bild (HTML Code):
<a class="Magic360" data-options="columns: 73; rows: 1;"><img src="images/stories/produkte/HVL/360-webp/01.webp" /></a>
- Vorteile:
- Vorteil:
measured parameters help to optimize the converting process and the product quality, for example by adapting the converting process to the quality of the incoming paper or board
- Vorteil:
modular system (e.g., Module HVL for tests with high viscous liquids or the Module Standard Coating for tests with coating color)
- Vorteil:
reliable and accurate test results, which help to solve issues in the converting process and with the product quality, where standard test devices are no help
- Vorteil:
no cleaning after measurement
- Vorteil:
only little amounts of test liquid are necessary: 3.5ml
- Vorteil:
easy handling
- Vorteil:
part of the modular system emtec PDA.C02
- Produktbeschreibung:
To make sure that the necessary product quality can be reached, specifications are agreed between paper maker and converter. These specifications are bases on standard test devices, such as Cobb or Gurley. But often it happens that although the quality of the base paper or board is within the agreed specifications, issues with the gluability, printability or coating-ability occur during the converting.
Since gluability, printability and coating-ability mainly depend on surface sizing and surface porosity, information about these two parameters are very important. But the standard test devices are not able to measure them. In comparison to this, the emtec PDA is able to measure these two very important surface parameters within the time that is relevant for the converting process and by this helps to ensure a well-running converting process and the right product quality.
- Anwender:
Paper producers , Paper converters, Board producers , Board converters, Corrugated board producers , Universities & Institutes
- Anwendungsgebiete:
Production control, Product optimization, R&D, Troubleshooting
- Ergebnisse:
- Wert:
I(t)
, Beschreibung:
transmission in time
- Wert:
t(I)
, Beschreibung:
time of a defined transmission
- technische Daten:
- Titel:
device dimensions, Wert:
basic device 42 x 16 x 32 cm (H x W x D)
, Beschreibung:
Motor Control Unit 11 x 16 x 24 cm (H x W x D)
- Titel:
weight, Wert:
approx. 19 kg
- Titel:
operating voltage, Wert:
115-230 VAC, 50-60 Hz
- Titel:
volume of testing liquids, Wert:
3.5 ml
- Titel:
PC software, Wert:
all common operating systems
- Titel:
sensor diameter, Wert:
3.5 cm
- Titel:
measuring frequency, Wert:
1MHz
- Titel:
data structure, Wert:
ASCII
- Titel:
measuring range, Wert:
grammages up to approx. 600 g/m², Beschreibung:
liquid viscosities up to 150.000 mPa.s
- Downloads:
- Beschriftung :
Leaflet (English), Link:
images/stories/infomaterial/04_PDA.C02_alle_Module/02_PDA_HVL/01_Leaflet/emtec_PDA.C02_HVL_leaflet_en.pdf
- Applikationsbeispiele inaktiv:
Nein
- Zubehör inaktiv:
Nein
- Zubehör:
SPM - Sample Preparation Machine
- verwandte Produkte:
PDA.C 02 MSC - Module Standard Coating, PDA.C 02 MST - Module Standard
The emtec PDA.C02 Penetration Dynamics Analyzer and the Module HVL (high viscous liquids) helps to predict the gluability of paper and board by measuring the converting-relevant parameters surface sizing (surface hydrophobia) and surface porosity. In comparison to the Standard module, the module HVL has especially been designed for tests with very high viscous liquids, such as glue.
- 360 Grad Bild (HTML Code):
<a class="Magic360" data-options="columns: 74; rows: 1;"><img src="images/stories/produkte/MSC/360-webp/01.webp" /></a>
- Untersuchung von:
- Eigenschaft:
paper
- Eigenschaft:
board
- Vorteile:
- Vorteil:
measurement of the converting-relevant parameters surface sizing/surface hydrophobia and surface porosity
- Vorteil:
measured parameters help to optimize the converting process and the product quality, for example by adapting the converting process to the quality of the incoming paper or board
- Vorteil:
modular system (e.g., Module HVL for tests with high viscous liquids or the Module Standard for tests with low viscous liquids)
- Vorteil:
reliable and accurate test results, which help to solve issues in the converting process and with the product quality, where standard test devices are no help
- Vorteil:
Module Standard Coating allows measurements with coating color
- Produktbeschreibung:
The PDA.C 02 - Module MSC Standard Coating helps to detect changes in base papers, coating colors, and coated papers, which are not detected by standard test devices, but which can lead issues with the coating-ability during the converting process.
The contact between coating color and base coating paper happens under high shear and pressure pulse, leading to a good simulation of the coating machine applicator.
Pilot coater and machine trials indicate the effects of coating color and base paper variations. The PDA.C 02 provides a tool to explore the causes.
- Anwender:
Chemical suppliers, Paper machine builders, Paper producers , Paper converters, Board producers , Board converters, Corrugated board producers , Universities & Institutes
- Anwendungsgebiete:
Process optimization, Product optimization, Benchmarking, R&D, Incoming control, Quality assurance, Complaint management, Troubleshooting
- Ergebnisse:
- Wert:
Max value
, Beschreibung:
surface sizing/hydrophobia
- Wert:
t95 value
, Beschreibung:
surface porosity
- technische Daten:
- Titel:
device dimensions, Wert:
basic device 42 x 16 x 32 cm (H x W x D)
, Beschreibung:
Motor Control Unit 11 x 16 x 24 cm (H x W x D)
- Titel:
weight, Wert:
approx. 16 kg
- Titel:
sample dimension, Wert:
75 x 50 mm
- Titel:
measuring
frequencies, Wert:
1 MHz, 2 MHz selectable
- Titel:
first measured value, Wert:
approx. 10 ms after
liquid contact
- Titel:
measurement
intervals , Wert:
approx. 1 ms
- Titel:
data structure, Wert:
ASCII file
- Titel:
supply voltage, Wert:
115-230 VAC, 50-60 Hz
- Downloads:
- Beschriftung :
Leaflet (English), Link:
images/stories/infomaterial/04_PDA.C02_alle_Module/03_PDA_MST_C/01_Leaflet/emtec_PDA.C02_MSC_CMA_leaflet_en.pdf
- Applikationsbeispiele inaktiv:
Ja
- Zubehör inaktiv:
Nein
- Zubehör:
OSB - Sample Preparation Device, SPM - Sample Preparation Machine, TCU - Temperature Control Unit
- verwandte Produkte:
EST 12 - Surface and Sizing Tester, PDA.C 02 HVL - Module High Viscous Liquids, PDA.C 02 MST - Module Standard
With the emtec PDA.C02 Penetration Dynamics Analyzer and the Module Standard Coating (MSC), which has especially been designed for the use of coating color as test liquid, the interaction between coating color and base paper, the surface sizing and surface porosity as well as the coating quality can be determined.
- 360 Grad Bild (HTML Code):
<a class="Magic360" data-options="columns: 73; rows: 1;"><img src="images/stories/produkte/MST/360-webp/01.webp" /></a>
- Untersuchung von:
- Eigenschaft:
paper
- Eigenschaft:
board
- Vorteile:
- Vorteil:
measurement of the converting-relevant parameters surface sizing/surface hydrophobia and surface porosity
- Vorteil:
easy to handle
- Vorteil:
measured parameters help to optimize the converting process and the product quality, for example by adapting the converting process to the quality of the incoming paper or board
- Vorteil:
modular system (e.g., Module HVL for tests with high viscous liquids or the Module Standard Coating for tests with coating color)
- Vorteil:
reliable and accurate test results, which help to solve issues in the converting process and with the product quality, where standard test devices are no help
- Produktbeschreibung:
To make sure that the necessary product quality can be reached, specifications are agreed between paper maker and converter. These specifications are bases on standard test devices, such as Cobb or Gurley. But often it happens that although the quality of the base paper or board is within the agreed specifications, issues with the gluability, printability or coating-ability occur during the converting.
Since gluability, printability and coating-ability mainly depend on surface sizing and surface porosity, information about these two parameters are very important. But the standard test devices are not able to measure them. In comparison to this, the emtec PDA is able to measure these two very important surface parameters within the time that is relevant for the converting process and by this helps to ensure a well-running converting process and the right product quality.
- Anwender:
Chemical suppliers, Paper producers , Paper converters, Board producers , Board converters, Corrugated board producers , Universities & Institutes
- Anwendungsgebiete:
Process optimization, Product optimization, Benchmarking, R&D, Incoming control, Quality assurance, Complaint management, Troubleshooting
- Ergebnisse:
- Wert:
t95 value
, Beschreibung:
surface porosity
- Wert:
MAX value
, Beschreibung:
surface sizing/hydrophobia
- technische Daten:
- Titel:
device dimensions, Wert:
basic device 42 x 16 x 32 cm (H x W x D), Beschreibung:
Motor Control Unit 11 x 16 x 24 cm
(H x W x D)
- Titel:
weight, Wert:
approx. 16 kg
- Titel:
sample dimension, Wert:
75 x 50 mm
- Titel:
measuring
frequencies, Wert:
1 MHz, 2 MHz selectable
- Titel:
first measured value, Wert:
approx. 10 ms after
liquid contact
- Titel:
measurement
intervals, Wert:
approx. 1 ms
- Titel:
data structure, Wert:
ASCII file
- Titel:
supply voltage, Wert:
115-230 VAC, 50-60 Hz
- Downloads:
- Beschriftung :
Leaflet (English), Link:
images/stories/infomaterial/04_PDA.C02_alle_Module/01_PDA_MST/01_Leaflet/emtec_PDA.C02_MST_leaflet_en.pdf
- Beschriftung :
Leaflet (French), Link:
images/stories/infomaterial/04_PDA.C02_alle_Module/01_PDA_MST/01_Leaflet/emtec_PDA.C02_MST_leaflet_fr.pdf
- Beschriftung :
Leaflet (Spanish), Link:
images/stories/infomaterial/04_PDA.C02_alle_Module/01_PDA_MST/01_Leaflet/emtec_PDA.C02_MST_leaflet_es.pdf
- Beschriftung :
Leaflet (Italian), Link:
images/stories/infomaterial/04_PDA.C02_alle_Module/01_PDA_MST/01_Leaflet/emtec_PDA.C02_MST_leaflet_it.pdf
- Beschriftung :
Leaflet (Turkish), Link:
images/stories/infomaterial/04_PDA.C02_alle_Module/01_PDA_MST/01_Leaflet/emtec_PDA.C02_MST_leaflet_tr.pdf
- Beschriftung :
Leaflet (Swedish), Link:
images/stories/infomaterial/04_PDA.C02_alle_Module/01_PDA_MST/01_Leaflet/emtec_PDA.C02_MST_leaflet_se.pdf
- Beschriftung :
Leaflet (Japanese), Link:
images/stories/infomaterial/04_PDA.C02_alle_Module/01_PDA_MST/01_Leaflet/emtec_PDA.C02_MST_leaflet_jp.pdf
- Beschriftung :
Leaflet (Chinese), Link:
images/stories/infomaterial/04_PDA.C02_alle_Module/01_PDA_MST/01_Leaflet/emtec_PDA.C02_MST_leaflet_zh.pdf
- Beschriftung :
Leaflet (Russia), Link:
images/stories/infomaterial/04_PDA.C02_alle_Module/01_PDA_MST/01_Leaflet/emtec_PDA.C02_MST_leaflet_ru.pdf
- Beschriftung :
Leaflet (Polish), Link:
images/stories/infomaterial/04_PDA.C02_alle_Module/01_PDA_MST/01_Leaflet/emtec_PDA.C02_MST_leaflet_pl.pdf
- Beschriftung :
Booklet (English), Link:
images/stories/infomaterial/04_PDA.C02_alle_Module/01_PDA_MST/02_Booklet/01_EN/emtec_PDA_Penetration_Dynamics_Analyzer_MST_booklet_en.pdf
- Applikationsbeispiele inaktiv:
Nein
- Applikationsbeispiele:
The characterization of the surface pore structure helps to solve issues with the gluability
- Success Stories & Wissenschaftliche Studien:
- Beschriftung:
Predicting the Behavior of Paper and Board Surfaces in Gluing, Printing and Coating Processes, Link:
https://www.jstage.jst.go.jp/article/jtappij/74/5/74_74.530/_pdf/-char/en
- Zubehör inaktiv:
Nein
- Zubehör:
OSB - Sample Preparation Device, SPM - Sample Preparation Machine, TCU - Temperature Control Unit
- verwandte Produkte:
EST 12 - Surface and Sizing Tester, PDA.C 02 HVL - Module High Viscous Liquids, PDA.C 02 MSC - Module Standard Coating
The emtec PDA.C02 Penetration Dynamics Analyzer (plus Module Standard, MST) helps to predict the gluability, printability and coating-ability of paper and board by measuring the converting-relevant parameters surface sizing (surface hydrophobia) and surface pore structure.
From April 25-27, 2023, at one of the most prominent conventions for the pulp, paper, tissue, and board industries in Europe, the IMPS International Munich Paper Symposium, testing device manufacturer emtec Electronic GmbH will present its innovative technology designed to optimize process runnability and product quality.
Operating under the theme “Progress in board and paper technology,” the 31st annual IMPS will once again bring together industry professionals for three days of idea exchange, expert lectures, exhibitions, and professional networking.
During the Symposium, Leipzig-based...
during gluing, printing and coating processes
Publication in "Coating International" - Issue 06-2015 on pages 23-28
1. Basics about specifications of paper and board
Paper and board is generally further converted, i.e. glued, printed or coated, in order to assure the required final quality of the finished product. For an optimal runability during finishing or converting processes, certain specifications between producer and customer are agreed upon. Usually, these specifications are based on standard measurement methods like Cobb test, Hercules Sizing Test HST, Bendtsen/Gurley porosimeter,...
emtec Electronic at the Zellcheming Expo 2015 in Germany
emtec Electronic GmbH will attend the “Zellcheming Expo 2015” in Frankfurt/Main, Germany – the 110th Annual Meeting and Exhibition. From June 30th until July 02nd, emtec will be present at the exhibition booth no. C46.
During the Zellcheming Expo, emtec will show a variety of testing instruments by which the complete production process can be controlled and guided in the right direction, to get an efficient process and the best possible quality with thelowest possible costs.
In the wet end it is extremely important to have detailed...
emtec Electronic at the Asian Paper Show 2014 in Bangkok, Thailand
emtec Electronic GmbH will participate at the "Asian Paper Show 2014" in Bangkok, both, the show itself as well as the conference. From April 23rd until 25th, we will be present at the exhibition at booth no. C10 together with CLC Thai - the representative for Thailand. In addition, emtec will also attend the Asian Paper New Applied Technology Conference on Friday, April 25th with a presentation about our latest innovative developments.
During the Asian Paper Show, emtec will present different testing instruments by which...
emtec Electronic at the Future. Forum Paper in Graz, Austria
On May 20th and 21st, emtec Electronic GmbH will participate at the “Future. Forum Paper” – the Austrian Paper Conference with trade show for pulp and paper industry in Graz.
During the two days emtec will present different testing instruments by which the process from the production of the pulp to the conversion to the finished product can be controlled and guided in the right direction to get an efficient process and the best possible quality with the lowest possible costs.
In the wet end it is extremely important to have detailed...
The company starts the celebration of its 25th anniversary in October in Lucca
The German company emtec Electronic GmbH develops, produces and sells testing technologies worldwide and celebrates its 25th anniversary starting at MIAC 2020 in October in Lucca, Italy at booth no. 103. The company is proud of what has been achieved over the past few decades and looks back on successful businesses as well as great partnerships.
In 1995 the company started with one device and four employees within the paper industry. Its founder and General Manager, Mr. Giselher Gruener developed a new measuring...
- 360 Grad Bild (HTML Code):
<a class="Magic360" data-options="columns: 73; rows: 1;"><img src="images/stories/produkte/SPM/360-webp/01.webp" /></a>
- Vorteile:
- Vorteil:
efficiently
- Vorteil:
user independent
- Vorteil:
saves muscularity
- Vorteil:
uniform
- Vorteil:
time saving compared to manual preparation: up to 50% !
- Produktbeschreibung:
- Avoidance of measurement errors by varying handling:
constant compressing force
- Thereby measuring results substantially more reproducible
- Adapter for various sample holders available
- Anwender:
Chemical suppliers, Paper machine builders, Paper producers , Paper converters, Board producers , Board converters, Corrugated board producers , Universities & Institutes
- Anwendungsgebiete:
Process optimization, R&D, Incoming control, Quality assurance, Complaint management, Troubleshooting
- technische Daten:
- Titel:
device dimensions, Wert:
40 x 25 x 40.5 cm (H x W x D)
- Titel:
weight, Wert:
33.5 kg
- Applikationsbeispiele inaktiv:
Ja
- Zubehör inaktiv:
Ja
- verwandte Produkte:
EST 12 - Surface and Sizing Tester, PDA.C 02 MST - Module Standard
Sample Preparation Machine to the Modular Measuring System PDA.C 02 and to the Surface & Sizing Tester EST und EST12.
The paper and packaging professionals will meet again this year at Tappi´s PaperCon 2019 in Indianapolis, Indiana, USA from May 05th to 08th. At booth no. 707, the company Technidyne will be the contact for all inquiries regarding the innovative testing equipment from the German company emtec Electronic GmbH. The representative from the U.S. will showcase a variety of testing instruments by which the complete production process can be controlled and guided in the right direction. From the wet end to the finished product, the application of the equipment enables an efficient process, to get the...
emtec Electronic and their EST12 - Surface & Sizing Tester at PaperCon 2015
This year emtec Electronic will be present at the PaperCon 2015 Exhbition and Conference with their EST12 – Surface & Sizing Tester. The company itself will have a presentation on Tuesday, 21st April at 1:14 pm. Additionally, the company Technidyne Corporation – the representative in the USA – will be present from 19th to 22nd April in Hall 2 at their booth no. 325.
The Cobb or Bendtsen tests are used to get an information about the sizing and the pore structure of paper, especially to check the quality and...
